Throw ratio first
Use the published throw-ratio range together with the required image width to estimate the projector-to-screen distance.
Large images from short distances
Epson Short Throw & Ultra-short Throw
Short and ultra-short-throw projection for classrooms, meeting rooms and spaces where presenter shadowing and installation distance need to be reduced.
Category guidance
Use throw ratio to confirm whether the projector actually fits the room
Short-throw and ultra-short-throw projectors are selected primarily by projection geometry. A small change in screen width or mounting position can materially change the required projector distance, so the numeric throw ratio should be checked before brackets, cabling or furniture are finalised.
Reduce shadows
Closer projection can reduce presenter shadowing and glare, making these models particularly useful in classrooms and collaborative spaces.
Mounting accuracy
UST installation is sensitive to wall flatness, bracket adjustment and image geometry. Allow appropriate commissioning and alignment time.
Short / Ultra-short Throw
EB-685W
WXGA3,500 lmLampThrow 0.28–0.37
View model →Interactive / Ultra-short Throw
EB-695Wi
WXGA3,500 lmLampThrow 0.28–0.37
View model →Short / Ultra-short Throw
EB-725W
WXGA4,000 lmLaserThrow 0.28–0.37
View model →Interactive / Ultra-short Throw
EB-725Wi
WXGA4,000 lmLaserThrow 0.28–0.37
View model →Interactive / Ultra-short Throw
EB-735Fi
Full HD3,600 lmLaserThrow 0.26–0.36
View model →Short / Ultra-short Throw
EB-760W
WXGA4,100 lmLaserThrow 0.27–0.37
View model →Short / Ultra-short Throw
EB-770F
Full HD4,100 lmLaserThrow 0.25–0.35
View model →Interactive / Ultra-short Throw
EB-770Fi
Full HD4,100 lmLaserThrow 0.25–0.35
View model →Ultra-short Throw / LightScene
EB-800F
Full HD5,000 lmLaserThrow 0.27–0.37
View model →System dependencies
Complete the projector deployment
A product is only one part of the deployment. Confirm the supporting components and infrastructure before final model selection or installation.
Dependency links are planning paths, not automatic compatibility claims. Exact model/SKU, interfaces, loading, firmware/software and accessories must be verified for the final project.
Image surface
Screen & viewing surface
Confirm size, gain/surface and room conditions.
Open related area →Physical integration
Mounting & service access
Confirm bracket/structure, alignment and safe service access.
Open related area →System design
Throw, lens, signal & control
Validate throw geometry and lens requirement where applicable, plus source/control transport.
Open related area →Selecting for a new project
Choose from the family, then verify availability
Use the listed models as the selection path. Exact Malaysia SKU, stock/channel status, warranty terms and accessories should be verified at quotation stage.
Maintaining an installed system
Do not assume an older model must be replaced
For installed systems, the appropriate path depends on product identification, supportability, compatibility and condition; the outcome may be repair, continued use, phased replacement or migration.
Assess an installed product →